Question for cab wiring experts.

Discussion in 'Amps [BG]' started by 68Goldfish, Apr 3, 2014.


  1. 68Goldfish

    68Goldfish Supporting Member

    Joined:
    Nov 4, 2006
    Messages:
    1,085
    Location:
    Port Orchard WA
    Hey guys, I'm looking for some confirmation on my thought process on how to wire two cabs in series.
    Some background.....I recently purchased a second peavey 2x15bw cab to mach one that I already have. The previous owner had done some rewiring to it whereby each 8 ohm speaker is wired to separate jacks on the back of the cab. What I want to do is rewire the cab to have both speakers in parallel to make a 4 ohm load (stock configuration) and use the extra jack for hooking up my other 4 ohm cab. in series to end up with a 8 ohm load. That way I can use both with my gk 700rb.
    Here's a diagram that I made that I think is the way to do it.
    I think it's a simple deal but I just wanted to pass it by the experts to make sure I'm not missing something.
    [​IMG]
     
  2. Bassmec

    Bassmec

    Joined:
    May 9, 2008
    Messages:
    3,187
    Location:
    Ipswich UK
    Disclosures:
    Proprietor Springvale Studios
    That's correct. :bassist:
     
  3. 68Goldfish

    68Goldfish Supporting Member

    Joined:
    Nov 4, 2006
    Messages:
    1,085
    Location:
    Port Orchard WA

Share This Page