1. Welcome to TalkBass 2014! If you're new here, we just went through a major site upgrade. Please post all concerns and bugs to the Forum Usage Issues forum. We will be monitoring that forum. Thank you for all of your feedback.

    The TalkBass iphone/android app is NOT WORKING currently. We're working on it. Tapatalk IS working, so if you need to use an app, use Tapatalk. Try using your browser though - TalkBass is now 100% responsive to your phone/tablet screen size ;)

    Please read the TalkBass 2014 FAQ for lots of great info on the new software.

Samson Servo 550 to a bass amp

Discussion in 'Amps [BG]' started by marleaux, Dec 30, 2013.

  1. marleaux


    Jan 14, 2011
    Likes Received:

    Samson and Hartke are same companies as you might know and some electricians wrote that they are completely produced with same components so I decided to make my Servo 550 a hartke bass amp with a Hartke Bass Attack pedal.

    I need some recommendations for the connections.
    Amp is 2 x 275W 4ohm powered and can be used as mono bridged to 550w at 8 ohm.

    Options are:

    1- connecting a 2 x 10" speakers to one side, a 15" speaker to the other side.

    2- 2 x 12" 8ohm speakers at bridged mono 550w.

    Do you have any advise?

    Thank you

Share This Page