Series/Parallel switch replacement

Discussion in 'Pickups & Electronics [BG]' started by trigger_happy, Jan 21, 2014.


  1. trigger_happy

    trigger_happy

    Joined:
    Nov 22, 2007
    Messages:
    63
    Location:
    Manila, Philippines
    Hi everyone,

    I just bought an EMG active P+J, and before I have it installed, I found out that you can't wire active EMG's in series/parallel..

    Source:
    http://www.talkbass.com/forum/f38/emgs-wired-series-jazz-bass-155560/

    Anyway, the controls of my bass are:
    vol,vol, bass, treble (Aguilar OBP-1)
    active/passive switch, series/parallel switch

    What can you guys recommend for replacing the series/parallel switch? I'm thinking of replacing it with a mid-frequency switch but I'm also open to any suggestions.

    Thanks in advance!
     

Share This Page