Seymour Duncan Antiquity II P Pickup

Discussion in 'For Sale: Accessories' started by A-Step-Towards, Mar 18, 2014.


Thread Status:
Not open for further replies.
  1. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
    I love these pickups. Lightly used and then pulled out of the project for a different direction. I was debating putting this in my Sonic Blue P bass but its not worthy:smug:

    Excellent shape, includes 4 mounting screws, 4 rubber tubes to raise and lower and also 3 pieces of foam to go under the pickups.

    $85 Shipped CONUS

    For a low price of a additional $15 I will include a quality wiring harness, it is CTS pots 250k Value and a switchcraft jack, the wires from the pots to the jack are longer then a standard P bass as It was wired in a bass with a side mounted jack but you can easily clip the wires going to the jack and resoder them shorter or tuck them in the cavity of the bass, also there is a ground wire running off the tone pot. All professionally sodered. I also have 2 fender P bass knobs for $12 on top of this. All prices rather firm as this is cheaper then any deal you will get.


    [​IMG]


    [​IMG]



    Add another $15 for just the harness, $12 for just the knobs or $25 additional for the whole set up for a total of $110.

    [​IMG]
  2. jmpiwonka

    jmpiwonka Supporting Member

    Joined:
    Jun 11, 2002
    do you know what the dcr on these is?
  3. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
    Sorry I do not.
  4. workdaddy

    workdaddy Supporting Member

    Joined:
    Feb 4, 2004
    Location:
    Central Coast, Ca.
    Looks like this is missing the brass grounding plate? If so, has one black wire been spliced or replaced?
  5. Register to disable this ad
  6. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
    There is no brass plate with it, I never had one. All wiring looks fine a black and white cloth lead about 6 inches long to go to the output jack and then a black cloth lead connecting the 2 halves, all wiring looks original no wiring is missing, spliced or played with, leads were cut at the pot so they are factory length.
  7. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
    since it was asked here is a photo of the copper wires

    [​IMG]
  8. jmpiwonka

    jmpiwonka Supporting Member

    Joined:
    Jun 11, 2002
    interested in partial trade for spb-1 or fender original precision (aka 62 avri) pickup?
  9. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
    sorry no I have one of each .
  10. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
  11. 4to5to6

    4to5to6 Bassist Supporting Member

    Joined:
    Apr 18, 2007
    Location:
    Canada, Pacific North West USA
    PM with offer sent
  12. A-Step-Towards

    A-Step-Towards Supporting Member

    Joined:
    Nov 16, 2009
    Location:
    Los Angeles California
    sold.

    still have the knobs for $12 PM if interested

Thread Status:
Not open for further replies.

Share This Page