1. Welcome to TalkBass 2014! If you're new here, we just went through a major site upgrade. Please post all concerns and bugs to the Forum Usage Issues forum. We will be monitoring that forum. Thank you for all of your feedback.

    The TalkBass iphone/android app is NOT WORKING currently. We're working on it. Tapatalk IS working, so if you need to use an app, use Tapatalk. Try using your browser though - TalkBass is now 100% responsive to your phone/tablet screen size ;)

    Please read the TalkBass 2014 FAQ for lots of great info on the new software.

Simple jazz wiring (novice)

Discussion in 'Pickups & Electronics [BG]' started by whitefuneral, Feb 12, 2013.

  1. whitefuneral

    whitefuneral

    Joined:
    Jul 24, 2011
    Likes Received:
    0
    So I did a search of the web and forums and I can't seem to find what I'm looking for.

    Does anyone have or can make we a wiring diagram for two jazz bass pickups but only one volume pot then out. I want to keep this build super simple. Thanks in advance! :help: :help: :help:
  2. Cadfael

    Cadfael

    Joined:
    Jan 4, 2013
    Likes Received:
    0
    No tone pot?

    GND from jack to housing volume pot. The "right" contact of the volume pot to the housing too (like you see it in 95% of the diagrams).

    HOT from jack to the middle contact of the volume pot.

    Both black J-PU cables soldered to the housing.
    Both white (yellow) J-PU cables soldered to the "left" contact of the volume pot.

    That's it ...
  3. whitefuneral

    whitefuneral

    Joined:
    Jul 24, 2011
    Likes Received:
    0
    thankyou very helpful! :bassist::bassist:

Share This Page