1. Welcome to TalkBass, the Premier Bass Player Community and Information Source. We've been uniting the Low End Since 1998!

    We're glad you've found us. Register a 100% Free Account to post and unlock tons of features.

Speakon to Speakon/Amp/Cabinet

Discussion in 'Amps [BG]' started by sandwich5027, Feb 13, 2014.


  1. sandwich5027

    sandwich5027 Banned

    Joined:
    May 6, 2013
    To use a speakon cable instead of 1/4 in cable, is it just a standard 12gauge speakon cable?

    It's on my Ampeg 3 pro to my Eden 212xst.....Amp is rated at either 8 or 4 ohms, Cab is 4ohms(There is no separate 4 or 8 ohm speakon output on Ampeg .and 2 speakon inputs on cab, which are not labeled either...Just want to be sure when I hook it up I don't damage anything, I've never used speakon before.......Thanks!
     
  2. Andyman001

    Andyman001 Supporting Member Supporting Member

    Joined:
    Feb 11, 2010
    Location:
    Long Beach, CA
    Yes, probably can even go with 14 AWG
     
  3. Hopkins

    Hopkins Supporting Member

    Joined:
    Nov 17, 2010
    Location:
    Houston Tx
    Just go to Home depot and get some 2 conductor (or 3 conductor, one wire wont be used) SOOW or SJOW cord. Just make sure the wires are in the same terminal on both speakon connectors. SOOW or SJOW cord is very flexible wire cable and is cheaper than instrument speaker wire.
     

Share This Page