Squier Standard (Jazz Spec) Neck ...

Discussion in 'For Sale: Accessories' started by tjh, Mar 22, 2014.


Thread Status:
Not open for further replies.
  1. tjh

    tjh Supporting Member

    Joined:
    Mar 22, 2006
    Messages:
    4,083
    Location:
    Minnesota
    This neck is from a Squier Standard Precision Bass Special ... it is in essence, a Jazz bass neck, with a Precision Bass logo ... nut is 1.5" and full Jazz bass neck profile ... nothing fancy here, just a fully loaded, very comfortable neck that is possibly my fav neck profile and finish of all Fender AND Squier necks, I have had more than a dozen of these, using them on MIA and MIM Fenders, as well as the Squier Standard bodies ...

    ... Neck is in decent shape, machine heads (tuners) are not floppy, truss rod is working, neck is straight and minimal fret wear ... only a few very minor dings, and fretboard is nicely grained ...it has been on two bodies, its original Squier P Bass Special and an '06 MIM Standard (so it fits Fender pockets fine) ...

    .. best of all, these necks are inexpensive, and a great bang for the buck ... $59 + actual shipping, fully loaded ... lower 48 only please
     

    Attached Files:

  2. tjh

    tjh Supporting Member

    Joined:
    Mar 22, 2006
    Messages:
    4,083
    Location:
    Minnesota
    .. fully loaded weight of neck is 2.52 lbs on calibrated digital scale .. (green tape)
     

    Attached Files:

  3. tjh

    tjh Supporting Member

    Joined:
    Mar 22, 2006
    Messages:
    4,083
    Location:
    Minnesota
    ... open machines like Hwy 1/One's, AmSpecs, MIM Standards, and other Fenders ... and showing minor dings on end of headstock ...
     

    Attached Files:

  4. Herbie Chesnutt

    Herbie Chesnutt Supporting Member

    Joined:
    Mar 19, 2010
    Messages:
    496
    Location:
    Highlands Ranch. Colorado
  5. Register to disable this ad
  6. tjh

    tjh Supporting Member

    Joined:
    Mar 22, 2006
    Messages:
    4,083
    Location:
    Minnesota
    ... and sold .. thank you!
     

Thread Status:
Not open for further replies.

Share This Page