1. Welcome to TalkBass 2014! If you're new here, we just went through a major site upgrade. Please post all concerns and bugs to the Forum Usage Issues forum. We will be monitoring that forum. Thank you for all of your feedback.

    The TalkBass iphone/android app is NOT WORKING currently. We're working on it. Tapatalk IS working, so if you need to use an app, use Tapatalk. Try using your browser though - TalkBass is now 100% responsive to your phone/tablet screen size ;)

    Please read the TalkBass 2014 FAQ for lots of great info on the new software.

SWR Goliath III horn noise

Discussion in 'Amps [BG]' started by bassgrooves2, Oct 6, 2013.

  1. bassgrooves2

    bassgrooves2 Supporting Member

    Joined:
    Apr 8, 2011
    Likes Received:
    1
    So I have been using my Goliath III for about 8 years now and it has always done well for me. Recently I have noticed an undesirable hiss from the horn when I turn on my amp. It sounds like it may be a blown driver when I play through it unless I turn down the l pad, then I just get a bit of light buzzing. I have heard that the horn itself may only need to be reseated or reseated at the cabinet, but I think my actual driver may be shot. I have also heard about the fuse in the x over that could be bad, but I would think that would give me no sound from the horn at all.

    Where should I start?

Share This Page