1. Welcome to TalkBass 2014! If you're new here, we just went through a major site upgrade. Please post all concerns and bugs to the Forum Usage Issues forum. We will be monitoring that forum. We are currently evaluating the "One Post Per Classified Ad" policy. Thank you for all of your feedback.

    The TalkBass iphone/android app is NOT WORKING currently. We're working on it. Tapatalk IS working, so if you need to use an app, use Tapatalk. Try using your browser though - TalkBass is now 100% responsive to your phone/tablet screen size ;)

    Please read the TalkBass 2014 FAQ for lots of great info on the new software.

TB600 Horn issues

Discussion in 'Amps [BG]' started by Cygnus X-1, Dec 8, 2013.

  1. Cygnus X-1

    Cygnus X-1

    Joined:
    May 8, 2008
    Likes Received:
    0
    Hi guys, in need a a little help. I recently bought a used Fender TB600C. The condition of the combo is near perfect. The sound coming from the 2x10 is great, but! When I turned up the dial for the horn, I notice a slight static (or not so clean) sound coming from the horn. At first I though it was just the horn itself. I proceeded to connect the head to my Ampeg 610HLF, as well as a friend's Hartke 115. Same static result when horn is dialed up. When in the off position, all sounds great. Today I decided to open the cover to see if there was anything visible I could detect. Here is what I found.


    [​IMG]

    [​IMG]

    Any thoughts would be greatly appreciated. BTW, I'm am able to return the combo If I want to. It's just I waited many years to get this amp. The feeling is a bit "bitter-sweet".
  2. Cygnus X-1

    Cygnus X-1

    Joined:
    May 8, 2008
    Likes Received:
    0

Share This Page