Separate names with a comma.
sounds like you need a hotter iron. Is your wire stranded or solid? you want stranded, and tin the end of the wire.
best place to start is with a ladder diagram
All electrical outlets will have the same ground potential if properly installed.
I was going to guess (which you already posted) that the...
Wow, that takes a while hitting all those like buttons but worth it to support working musicians.
You'll need a box and pan brake, also called a finger break, to make enclosures.... plus some mad welding skills. I recommend starting with a kit...
It will take 720 watts to draw 6 amps on 120 volt circuit.
Yes, if they care about their family's safety or they want home owners insurance... besides, there's no need to gut a house just to rewire it....
As an electrician, I strongly disagree with this statement. K&T is pre-WW1 methods. There are so many faults with it, the main one being that it...
I made my own from some georgeL cable and ratshack connectors. definately get the 90 on the 1/4" plug if your jack plate is on the front
knob and tube wiring is dangerously bad
Don't assume anything.
Alnico magnets are more likely to demagnetize than ceramic. I've had it happen.
take two pads next to each other you want to connect... flow a drop of solder on each then fill in the gap. right or wrong, that's how I do it.
I've been into it for a year now. I suggest http://www.buildyourownclone.com/board/ for help. Real cool bunch of guys always willing to help a...