Acoustic Image is a defacto standard for upright bass and for amplification of all acoustic stringed instruments. Wonderful for electric instruments as well. Extremely clean, with ample headroom and power. Transparent is the word often used to describe the Acoustic Image amplifiers. Great for doublers, guitar, and other non-bass instruments.
SYSTEM
Frequency Response: 20 Hz - 20 kHz, +/- 0.5 dB
Distortion: < 0.5% full output, < 0.1% typical
Hum and Noise: -85 dB or better
AC Power: 115V/50Hz, 230V/50Hz, switchable (Japan version 100V, 50/60Hz only)
Size: 10.2" W x 8.2" D x 3.5" H
Weight: less than 5 pounds
Preamp: inputs through combo front panel jack
Mic input: 600 ohm balanced, XLR connector
Phantom power: 38 volts, on/off switch w/LED indicator
Instrument input: 1 Megohm impedance, 1/4" jack
Direct out: + 4dB, balanced, XLR connector, ground lift, pre/post EQ selector
Effects loop: Parallel type with return level control
Bass control: Shelving type, + 15dB @ 60 Hz
Mid control: + 15 dB @ 650 Hz
Treble control: Shelving type, + 25dB @ 10 kHz
Notch filter: > -18dB sweepable from 30 to 800 Hz
Low cut filter: -12 dB / octave, sweepable from 30 to 800 Hz
EFFECTS
Type: Digital with 6 presets and level control
Program presets: 3 reverb(hall, room, plate), delay, ambient chorus, flange
POWER AMP
Topology: Class D, (PWM)
Switching Frequency: 200 kHz
Output Power: > 250 Watts (8 ohm), > 400 (4 ohm), >500 W (2 ohms)
Minimum Load: 2 ohms
Output Connectors: Neutrik Speakon type (pole 1)
INCLUDED ACCESSORIES: Gig Bag with shoulder strap, 6 foot Speakon to 1/4" cable
AVAILABLE ACCESSORIES: twist-lock to twist-lock speaker cables
twist-lock to 1/4 inch speaker cables
Recent Reviews
Head Details
Loading...