load

Hey everyone, I’ve been looking into lightweight rigs to skip the cabs and run directly to FOH. I was looking at Darkglass preamps and DI’s and...

Two cabs, each 8ohm. Connecting parallel maths is easy: 2x8ohm=4ohm. Does anyone know how to calculate load when connecting series (I understand...

Hey TB, I have a cab sitting in our rehearsal room that a guy told me it should work, but it had an XLR input and 2 of the 3 pins were bypassed...

I must confess that I love the sound of heavy old cabs and EV and JBL K drivers. I know that there are lightweight options that sound very good,...

Was moving some stuff around on my pedal board and ran across an odd problem. I had a passive DI I decided to stick at the end in case I have a...

What's the OHM load on Fender 70s and 80s 2x12 Bandmaster cabs?

I own an Ampeg PF-20T amplifier that I use for home practice. Typically I play with headphones, and connect the amp to my Presonus Audiobox 22 VSL...

Salut all ! I did this on my geddy lee bass (Crazy Modded Geddy Lee Jazz bass ( SMB-4D + OBP-1 ) ) : I add a master volume pot (250k) after the...

I just bought a Fender American Pro PBass and I’m planning to put TI jazz flats on her. I wonder which one is better, top load it thru the bridge...

I'm an engineer and I am building a tube amp. I don't need to build a tube amp, I don't need to have a tube amp, I am doing it simply because I...

So I've been digging through old threads :bookworm: and have found some ideas for the p bass I've been modding the last couple months. I routed...

'surface mounted' output socket? can we start one?

I am having brain flatulence. I can't remember what the name of the thing I'm looking for. I want to get my head down to a 4-ohm load without...

I am beginning to curse every time I go to TB now. If we could get the ad moved from the top then maybe it wouldn't affect our clicks. Am I the...

This box is awesome if you’ve got a low watt all tube amp and you want to do some silent recording or use the headphone output on it for...

I just got a Markbass Little Mark Tube 500. Markbass say all their amps can be run without a speaker load. I'm a bit surprised by that, cos...

A friend of mine acquired an Ampeg 210 cabinet—looks like a Portabass IIRC—rated 400 watts from a pawn shop, but discovered it was loaded with car...

I'm using a solid state 800w/4ohms amp head and a 8x10 2000w/4ohms speaker cabinet. Is this okay for the cab and head? My head also says it runs...

hello all, Forgive my ignorance if I’m massively overthinking this...but I was getting very close to pulling the trigger on an American standard...

While reading another post about a problem a member was having with his amp it was brought up not to turn the amp on or off without a load on it....

What´s going on with this thing - there seems to be both?!?! :wideyed: Different power modules? [ATTACH]

Just a general question here. Say i hot an amp that can supply 350 watts at 8 ohms program. I hook up an 8 ohm speaker that's rated for 350 watts,...

I have a Crown Power Base 1 power amp and will be running it in 'parallel mono' mode into two 8 ohm speakers, wired in series. The specs on the...

This may be a simple question, but I keep getting conflicting info from the Internet. I have been recording from the direct out jack on a GK 400RB...

I recently found my account logged out on the mobile app and upon logging back in my profile is blank. I tried uninstall/reinstall to no avail....

Anyone replaced their original Eden 10" spkrs w/neos? I really need to lighten my load. (4 ohm cab)Thanx!

...on the cover of this LP: [MEDIA] Great music, too. :thumbsup:

Does anyone know who makes these ferrule type string anchors ...? [ATTACH] Yes, this is a Marleaux bass.... BUT I seem to recall seeing these on...

Just as said in title... My favorite strings are GHS Pressure Wound. Of late, I can only obtain the 'newer' (relative) product that has a 37.25"...

[ATTACH]

It's been a very long time since running a component rig and I'm a little fuzzy on this point. When the amps' output rating per channel is at 4...

Hi, I would like to be able to to use the DI on my MESA amp without carting around a cab sometimes. I would like to be able to plug the power...

First, I'm not a super tech P.C. user and I'm sure I've caused this some how..... Never had this problem before till last week. Don't have...

I have an old 15"inch dietz cab that's solid as a rock loaded with some crappy replacement. I'm currently running a 2003 mij Geddy lee jbass...

Hey everyone, I am going into the studio soon and I want to record my Ampeg SVT-CL into the board without a cab. This means I have to get access...

I occasionally run (2) 5.3 ohm cabs and need an amp that will handle it. Like most bass players, I'm always looking for a new sound. Currently I...

Guys, Yesterday I went to my local shop to pick up some stuff. I scored a SPB-1 (Seymour Duncan Vintage Pick Up), a CTS no load tone pot, and two...

My SVT-6 Pro has 4 tubes in the power section, but it's also solid state. Do I need to load the amp to play or can I use it for DI purposes...