Separate names with a comma.
Am I taking crazy pills or are these just impossible to find? With the popularity of Kalium strings, I expected to find some files in the .145 -...
Selling this adjustable brass nut that I bought for a project and never used. 3/16" thick, 1 9/16" wide. Like new condition. $15 shipped in the...
Do you own a new Fender Deluxe Active P Bass Special? Is your nut straight or slightly angled? I measure about 4/32 spacing above the nut on the G...
I pulled my new Fender Deluxe Active P Bass Special out of the box, didn't even plug it in yet. My eyes went straight to the slightly crooked nut...
I keep thinking that if I had a smaller 1/2 position stretch then I'd be able to play faster. I've got small hands, and it's always been a...
Hey guys I have a Ibanez that the the nut keeps sliding on.It is a cheap one I just use to practice,dont really want to spend a lot on repairs.Any...
Anyone else have this? My other 62 reissue has a 1 3/4 nut which I like alot better. the 1 7/8 is just a tad to big. yet on the fender web site it...
Well I'm pissed. 1st restring & the bass end of the nut falls off. I carefully took the factory strings off & lightly penciled in each nut slot. I...
Hi guys, I just scored this one with a pair of EMG 40CS for a bill but it shows the typical signs of negligence on top of the glued back together...
So I bought a used bass that needed the nut replaced and in doing some research on nut slot spacing, I noticed that nut slots have progressive...
I have a Hofner Icon bass. The nut is not cut very well and I would like to have a new one cut using one of the genuine Hofner white-black-white...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] I replaced the existing Just A Nut III on my German Warwick 4 String Corvette $$ (Doublebuck) with a brass...
Selling this Black TUSQ XL P Bass nut. Bought this and then realized that the nut slot on my bass is flat. This nut has a curved bottom. $8 to...
I mean is it too complicated to replace the nut? I got this Fish bass for the kids to learn and when I checked today I noticed the E string out of...
Hi, I wanted to bring up a minor issue I have with my Fender Adam Clayton Jazz Bass, and ask for advice. I say minor, because I only really hear...
it has a modern radius but what is the nut width? por favor
The baking soda and super glue guitar nut repair trick [MEDIA]
I have to replace the nut. I think I should be able to do it myself. I'm wondering if anyone will have an idea of what to get. The bass is cheap...
Hey guys, I've been thinking about a little problem that I may have when I (possibly) get a 5 string later this year. The B strings I have looked...
I bought a late 90's Peavey Foundation 5 a few years ago off ebay. The first time I had any need to adjust the neck was earlier this year and I...
Can someone let me know the specific size files files I need for the nut slots on a four string (EADG) 2013 Fender MIA P bass? I do my own setups...
I have an old Sabre and I'd like to replace the brass replacement nut someone installed along the way. This was a special order neck because it is...
I have a 1992 fender jazz bass plus that I might sell in the near future. The nut is chipped. my question can i get one that just drops in?
What can I expect if I replace the plastic nut on my bass with a brass one? Bass in question is a Shecter Stiletto neck-through 5 string.[ATTACH]
Does anyone have a source for a spoke wheel nut that will fit on a heal adjust All parts neck. I am not sure of the thread size. I am assuming its...
Just wondering, do any of the Specter basses have 1 1/2" nut widths, or are there any of the lines that have narrower nut widths. I don't get...
Hi all, I am about to start filing a nut for a 5 string bass, but in measuring and laying out the string spacing I got confused and in need of...
There are two acknowledged ways to measure nut action: 1) Space between the open string and the top of the 1st fret - quite understandable, you...
Warwick fiber just a nut. $15 [ATTACH]
I'm just curious - what would you say this nut width is? [ATTACH]
Hi guys, There are two ways to go about string spacing at a 4 string nut: 1) divide the space between the center of the E and G slot by 3 and...
For sale is a Lakland USA Bob Glaub PJ with a 3 tone sunburst finish. Body is alder and the maple neck has a rosewood fingerboard that's 1.5" at...
And yes, I'm taking it to a tech... Does this look high to anyone else? I read a lot of different opinions on Ricks needing to be set up...
Hi all.. forgive the question, but I've exhaused Yamaha Europe as a source of information.. 'kin useless. I want to order a truss rod wrench but...
So, the vintage black eagle has just perfect, insanely low action. I wanted to replicate that on my reissue. Bought a Groovetech multitool from...
So it seems I've looked everywhere, but have yet to find a full set of nut files for a 6-string. Is everyone else piecing together to make a set...
I've got a schechter diamond series C-4. I've had this thing for I don't know 13 years. I love the bass. Recently when I was replacing the...
I've acquired some very nice pieces of ebony from a woodworker friend of mine. They are leftover from a project of his so they are "scraps" to him...
Bass Nut for Warmoth P bass regular neck (not the slim model). The nut is unused. $15 shipped CON US
I have just bought a second hand Traben Phoenix bass, and was changing the strings. The metal nut came away when I took the strings off. What's...
Hello, All, My apologies if this question has been posted before, but I could not find the answer anywhere. I recently picked up a Fender Mex P...
Been trying to get my Jazz Bass Special set up. The neck relief is fine and the bridge saddles are about where they should be. The action is fine...
Hi all! Today I've found a problem trying to fix the truss rod of my ibanez btb 506. This bass has 2 different truss rod and the one on the left...
[ATTACH] [ATTACH] Fender Squier Bass Neck 2002 of a Anniversary P Bass, replace decal good shape straight neck had no buzz good frets plenty of...
Hello, I picked up this neck to build up a 4 string P bass. Ended up changing directions and am building a 5 string so this one is up for sale....
Its all in the title. thanx!
Been looking for a brass bass nut blank since I want to replace the worn out nut on a used bass I picked up. It'll also allow me to put some...
Hello, I'm going to slot a new nut for my bass but I'm unable to find a suitable file for the E (.115). I've been wondering what professionals...
Hi everyone, I would like to upgrade my 2008 Fender American Standard Jazz Bass, becouse I am afraid that my standard nut from factory is too low...
I'm getting a new bass soon, 5 string multiscale obviously everything will be stock and I was looking to upgrade to an adjustable brass nut, the...
NOS Warmoth Paddle Head neck. Ready for your custom headstock shape or have your local luthier cut it to a Fender. No finish (factory) Maple with...
I have an early 60s P-bass that I've owned since '85/86. A previous owner had replaced the nut with some type of synthetic material, that while...
Hey all, I recently bought a MP Jag for a really sweet deal off Craigslist. Only issue I've got with it is that the truss rod nut is totally...
Hello Luthiers, I need/want a new nut for one of my basses, but don't have the skill or tools to make one myself. I need one that's the same as...
I need new nut for my DJ 5, E and B slots are way too big and wide. I managed to ease problem with bandages on a strings but I like it being all...
I just cannot play jazz necks. I have big hands and I cramp up big time on any jazz neck, and I know by now that they are not for me. However,...
