ohms

Hi guys, any experience with that set up? I'm a newbie in regards to amps and cabinets, specially when it comes to ohms and what fries a cabinet....

Got a question for the gear heads out here. I'm looking at buying a new bass cabinet for my TH500. Most cabs I'm looking at within my price range...

What are the rules with minimum ohm loads and cabs? Could we please do a refresher course on this? What are the do's and don'ts of combining heads...

Ive been playing my GK w/the SVT810 and Luv it, Got an opportunity to pick up an SVT810E and couldnt pass it up, thinkin, "now that tone and EQ...

This stuff always confuses me, so I'm hoping someone here with the correct knowledge can help me out? It's a wattage/Ohm question... I'm...

Hello, I have a question regarding the safety of running a 5.33 ohms load? Both of my bass Amps can handle a load of 4 ohms which I've seen on...

This is an interesting discussion on speakers (1520) Meet a true GUITAR SPEAKER EXPERT! (from JENSEN Speakers) - YouTube

[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] My mind is fried right now... I am not ashamed ... to ask.. a stupid question but it would...

What might happen to a '73 SVT from being played through an SVT cab (an old one with the 32 ohms CTS speakers) that only has 7 speakers, doing...

Hi all - up for sale is an Epifani DIST 112 cab. These are AWESOME cabs rated at 300 watts, with rare switchable impedance (8 to 4 ohms)! These...

Hi, I've got Ampeg Heads, the SVT-4 Pro, as well as a B4R (which is similar in terms of its power specs, dual channel+mono bridgeability; but is a...

If I have a head that is 500w at 4ohm and 250w at 8ohm and 2 cabs that are rated 300w at 8ohm. Is this ok? Optimal? How should I hook them up?...

Hi all. This may seem like a rookie question but I cant find a good answer anywhere after youtube/forum/google searches. I'm hoping to better...

I am doing a rehab on a 4x10 speaker cabinet. I am installing 4 - 10" speakers each rated at 110w RMS and each speaker is at 8Ohms. I plan to wire...

I’m saving up for a new amp and decided to go with Gallien-Krueger. I’ll probably go with the MB 800 head. Would it be a good idea to use a Neo...

I currently have a the WTX264 paired with an Eden EX112 4 Ohm cabinet. If I add another EX112 cabinet, does it need to be a 4 Ohm version or can I...

Hi guys! I have a technical question from an old gk combo MB212. Long/short history. About a year ago, my MB212 superior speaker went bad,...

Does this exist and better yet can I have it in a pretty color? Should I (someone who has built many of amp, guitar, cab, and pedal) should I...

I'm selling my GK 4x10 Neo cab (4 ohms) in excellent condition and perfect working order. I am the original owner. Cosmetically this thing is...

Hi all, Looking for a consensus amongst 410 users. For most manufacturers, are 410s more common to be 4ohms, 8ohms, or is it a pretty even...

I didn't see any posts about this specific cabinet setup I'm interested in currently. I got a 4x12 cabinet that runs at 16 ohms, and a 4x15...

Hey guys, so I recently dug up my old amp head which is an Eden NA-600 Head. This head is rated at the following: 630W RMS @ 2 Ohms 435 Watts RMS...

Hey all, I've had my cab break in an interesting way; [ATTACH] Now because I'm a starving musician, I was wondering if I would run into any...

Good Afternoon, I have two eminence CA1059s which are 10" drivers with 500 watts and 8 ohms I'm looking to make another cabinet with a 15" driver...

I recently got my second Darkglass m900 head and just like the last one and every single one I know someone has it just can’t really do 2 ohms...

So I’m looking into purshcasing a 70s Sunn Coliseum bass head and I’ve read that the amp runs at 320 watts at 2ohms. I was wondering if anyone has...

Hey everyone, I'm new to this, so please go easy on what may be a dumb question. Could I use a Hartke LH500 amp head (500 watts at 4 ohms) with...

I just bought a 2016 Eden WTP-900 to replace my Navigator + WT1250 that was stolen. I have an odd configuration of 3 cabinets: 1 4ohm cab and...

Hello, Just made an account 30 minutes ago after spending the last two days reading/ learning off this site. My question is, right now I daisy...

I recently acquired a SVT 5 Pro and a 4x10 hartke cab . They both work . The SVT, to my knowledge, is capable at running at 500w on bi amp mode...

I snagged a Hartke XL 4x10 for free when I bought an SVL 5 Pro. I now know about aluminum speakers, haha. I suspect one of the voice coils in...

Hello, I have an Ampeg SVT-7 PRO with two speaker outputs or: 600 watts (8 ohm) single output 1000 watts (4 ohm) double output. I have three...

I think I understand this, but just to be sure I thought I'd check in with you all: I'm running an Ampeg PF-800 (800w into 4 ohms) into an Ampeg...

So I have a Hartke 4x10 amp rated at 400W @ 8ohms. I’m checking out the Bugera BV1001M bass head to pair with it, which is rated 1000W at 8 ohms....

I find the whole ohms law business very confusing! I run an Ampeg SVT 7 Pro head: 1000w @ 4ohm 600w @ 8ohm. I’m looking to buy a new smaller...

Again I am new to all this and trying to learn. If I buy the above mentioned cabinet and connect it to a GK BACKLINE 300 watt AMP Head rated at...

Reposting this since the other got 0 replies.. How's it going my fellow bassists? So I'm currently using a vintage Kasino Concert Con-B amp and...

How's it going my fellow bassists? So I'm currently using a vintage Kasino Concert Con-B amp and 212 cabinet that matches. 1 of my 12s is blown so...

The great downsizing event continues. This is a killer cab. I wish I had a place to keep it! Everything works as it should and has a set of new...

[ATTACH] I just bought a 1973 Peavy Century 120( I had one as a kid 30’years ago) On the back by the 2 parallel speaker inputs it says 8ohms at...