Separate names with a comma.
A vintage matching set of pre-CBS Fender 1963 Stackpole 250k pots for your restoration bass project. 304-6334. All stamped same 34th week of '63....
I was looking at the American Standard Jazz bass on this page (scroll down) and it struck me that the tone/volume pots on the '60's version aren't...
These saw only about a year of play time: I bought the bass new and, because it was the 90s, pretty quickly swapped out the great-sounding stock...
Got it from a another TB but just landed a more suitable pre for my needs. This is truly a boutique class preamp that compares with any that the...
In really considering upgrading the pots in my pbass and my jazz bass. Most of my fenders are essentially parts basses and the only thing I...
I'm trying to get away from non-stick cookware altogether. Sure, it's convenient, but I read lots of articles regarding chemical exposure from the...
[ATTACH] Just bought this to go with a jazz neck I have. I am wanting to fit a set of Fender 62 custom shop presision pickups. I have never done...
For Sale are a set of 2015 Fender Classic Series Lacquer stock pickups. Good Condition, prewired with full sized solid shaft 250k pots, and...
I am looking for dual gang pots with sufficient threaded length to install on a rear routed body. I am specifically looking for A250k and B1M...
Just curious if the pots in a T40 could be replaced with some run of the mill cts pots and still retain the ability to go from humbucker to single...
I've had Dimarzio Model J pups in a 74' J bass since the early 90's with the stock 250K pots. Have read that going to 500K pots adds some treble...
I have a '55 Pbass that has the following modifications: Bourne pots- 250k vol; 500k tone; Bill Lawrence Q Filter. The tone pot seems to function...
So I've been digging through old threads :bookworm: and have found some ideas for the p bass I've been modding the last couple months. I routed...
Hi everyone, I was curious instead of using the “norm” 250k or 500k pots (single coil/humbucker) what would be the pro’s and con’s of using 1meg...
So I rescued a 5 string bass off a guy at work for 40 bucks a few years ago sat in a closet and was going to be a project but never got around to...
Here’s a Mix/Match EMG Jazz Bass set, that works and sounds good together. Since EMGs run on an internal preamp, they do not have the same reverse...
I need a tone pot... can I use an old volume pot for the purpose? 250k ohm, same as the one I want to replace. Thanks.
I'm putting a GZR P pickup in an old aluminum neck Kramer and would love to use the black speed knobs but think a set screw type knob is probably...
Welp, Greetings to all. I hope one of you might be able to help me reconstruct this bucket of bolts. :-) Years ago I took apart an old Jazz bass...
Hey folks! I recently got my hands on an Ibanez Proline 5050, which unfortunately has had two pots replaced. One of those being the bass EQ pot....
This is a pretty straight forward question: I would like to replace the volume and pickup blend pots on my old passive Warwick with a stacked one....
Hi! I'm buying a pair of DCs and want to go Vol/Blend instead of Vol/Vol/. According to the official diagram An active blend pot and an active...
Hi guys, I dismantled my amp head (Laney RB9) for the first time yesterday since purchasing. Tbh it wasn't as dirty/dusty as I thought it was....
My blend control is kinda loose and i tried to tighten it so that it wouldn't move so easily but i kinda failed. I tried that by using a small...
Hi everyone. My first post on TalkBass! I have a Warwick RockBass Corvette $$ that I love to death but I'm struggling to figure out what I should...
Hi, everyone. I've done a search and nothing has shown up particular to what I'm asking. My Genz Benz Shuttle 6.0 has been squealing a bit...
Hello, I was curious to know if anyone has seen/used a stacked pot with a lower profile. I've done a little bit of searching through google, but...
Hello everyone. So I just installed my wiring harness in my Rickenbacker 4001, and for some reason my tone pots are having no effect. I know all...
EMG pots -quik connect and wired with tone cap. 25k vol and 25k passive tone. [ATTACH]
OK, maybe I have been looking in the wrong places, but does someone know where I can find set screw type, numbered concentric knobs? Maybe kind of...
Hey! So I've been in the process of restoring this bass guitar. It's a cheap 5 string with ACTIVE pickups. If someone could teach me about what...
Had something happen recently that I've never experienced. I went to play my relatively new (2 years old) USA Geddy Lee Jazz bass and it sounded...
Can someone provide me with a diagram? I'd also need to know the value for the resistor. Background: I never understood why you would want dual...
[ATTACH] This is a 1997 (Feb 28th, '97 according to the neck pocket) Fender American Vintage 62 series with some very authentic details, authentic...
For my 2001 & 2003 made in S. Korea I'm replacing both original EMG HZ 40's pups & preamp with Seymour Duncan Blackouts ASB-BO-5a & Seymour...
History: I bought this setup over a year ago (from ncsupplycompany on Ebay) to improve my SX medium scale jazz. Instead, I ended up buying a...
Hey! Yesterday I bought this bass guitar for really cheap (20€). The seller said it is from the 70's. I dont know anything about basses so please...
Parts Purge! $75 (Free Shipping) Takes All! Mikro 5 Neck Strings Bridge Pickups Pots All Kinds of Parts! OK. Here goes. Parts Purge of a Mikro 5...
I need some supplies....which has the best? Don't need the cheapest just a wide selection and great service etc...Thanx!
I tend to use 250K volumes for single-coil pups and 500K for humbuckers, but now I'm building a bass with dual Jazz pups (of a sort) in MM shells....
