Separate names with a comma.
Hello collective! I encounter a clacking noise when I engage my c-switch (cap going to ground to alter pups resonant freq) for the first after...
So basically I've modified my Squier vintage mod jazz bass, put a quarter pound PJ set in and I'm almost done but can't find any wiring info on...
Would it be possible to wire a 4 way blade/lever switch (Telecaster guitar style) with the following pickups and the selections in the list?...
Hi everyone. There are 1000 threads about the color switch on this device....I for one actually like the colour switch engaged with the mids...
I'm looking at installing a Stellartone Tonestyler on my SG bass with a Master Volume, traditional Tone control and the Tonestyler. For pickup...
I recently acquired a Aria Pro II CTB series but it is missing the tip of the selector switch. I also have a red Aria Pro II SLB which I took the...
So i'm just in my normal day and it just pop to me. How about having magnetic pickguard? Buy some very thin neodymium magnet in pair (2mm for...
Hi everyone I've been looking for where to buy this dpdt switch for my custom bass and can't seem to locate one anywhere.....I've checked with...
Hey all, Just bought a Gallien-Krueger MB Fusion 800 from GC. It was a floor model and the salesperson eventually had to go scuffling for the...
Hey everyone, I recently bought a Red Witch Factotum pedal, which is a combination Octaver and Drive. I love the thing, like the sound it gives...
Okay, so this isn't about technique, it's about pedals, impedance, hot/weak signals and all that. For those of you who have made the switch,...
Up for sale is a wiring harness from a brand new Epiphone electric guitar featuring the quick connect wiring system to plug Epiphone quick-connect...
So I purchased B3K few months ago and lately I have issues with the on/off switch. Seems that about 1 out of 10 pushes it wont go on, especially...
First, this topic is probably an old one, but I figured I'd start another thread.. Is it possible or even advisable to replace the switch on a...
Like new Zoom B3 with FP02 expression pedal(never used) and FS01 foot switch(new still wrapped and never used). B3 is basically new out of the...
Hey All I'm installing an OBP-3 in a Gibson RD bass and had two questions, hoping for some sage wisdom from the TB crew! I'd rather have a...
Here's a used black p-bass pickguard. It comes with a 4-way switch that is wired for series/parallel and 2 soloed pickups. I used it in a PJ bass....
Bought this for a project which did not end up happening. As is. $80 shipped to lower 48. International buyers will pay all shipping costs....
[ATTACH] I bought the mid-80s Ibanez Axstar bass off Craigslist. Not working. It had been in his closet since 1997. At some point, someone had...
Hey guys, any advice would be helpful. I sliced the index finger of my plucking hand today opening a box. Pretty good cut, into the meat a...
I recently aquired older Esh Hero IV (1996.), a very nice passive bass with Schaller pickups and hardware. It plays great and weights just 3,3kg...
So it's been 6 years since I've owned an all tube head and wondering what I should when I switch from my VR head to the Gries B15N clone all tube...
Hello, all. I have a Godin Shifter Classic (P/J), and I'm replacing the stock pickups to EMG Geezer Butler pickups. The tricky thing about...
I've found schematics for splitting series humbuckers. For a pickup meant for parallel I guess I wouldn't group together red+white but would...
Hi all, Trying to figure this out but I'm having a bit of a brain fart at the moment. I'm wanting to use a 3PDT to switch a tone pot from treble...
Home ownership is rearing it's ugly head again and I admit I'm a little embarrassed I say I've never had to do this, but I knew it was coming...
Great working and looking condition Mesa Boogie M Pulse 600 Bass amp. Comes with foot switch, foot switch cable and power cable.
So I have another question about wiring, and the title pretty much says it all. I have it kinda figured out, but the middle position isn't...
Hi everyone! For sale/trade/partial trade I have 2 harnesses. Both made by me for customers who ended up not wanting the harnesses and returned...
I have a draconis dual boost, which was made by lizard leg effects, who unfortunatley no longer exist. I have no instructions for the pedal. The...
As much as I am not a big fan of drop tuning, I've just been asked to join a band, whose front man is aware of my dedication and capabilities on...
Hello TBers, I'm an amateur electronics guy who has a crazy idea. I'm refurbishing a bass that I'm dropping in j-bass electronics in place of a...
Hi - I'm pulling together a pedal board with several gain dependent effects on it (multiple compressors), and I want a simple switch or pedal that...
Basswitch preamp and switching system , great for upright and electric bass In excellent condition with case ,power supply ,and manual ....
So I recently bought another EHX Nano Bad Stone. It has one of my absolute phaser sounds but it also has one of the most ridiculous loud popping...
I have a white 2012 MIM P Bass and I want to swap all the hardware out for black. I've looked up a few of the more important bits and I want to...
I'm working on a Warmoth build and I have to install a three way switch. The body already has three holes pre drilled and I need to add a fourth...
A week ago I was window shopping on ebay and found a very attractive looking Epi Limited Edition Thunderbird in gloss black with a gig bag...
Apologies if this has been asked before and I haven't found the thread yet. I have a MTD kingston 5 string and it has the usual active preamp...
Recently I've come across two excellent DI's that have something built in that makes them more than just your average DI. The first was the...
My backup amp just let me down. I've an Eden WT500 Highwayman that's got a power switch that sizzles. Since I've owned it (used) the LED's for...
This is Ibanez best Premium preamp that came out of my new BTB1605. It is a 5 knob and 2 switch layout. Configured for Vol/Blend/bass/mids/treble/...
Greetings I have a mint condition Strymon El Cap delay and fav switch up for sale. Includes box and power supply .. Velcro neatly attached on...
Eventide Timefactor with extra switch pedal and power supply, manual great sounding delay many presets and functions with the Xtra pedal
Got help from line6man!
*this might be in the wrong section* Does anyone know of a rotary switch that I can put a standard guitar knob on? I'd prefer at least 4 positions...
Hello! I have a question. Is it possible to install (at home) led lamps in switch 3? Because if i don´t look to my BH800 to see the led, and if...
I have two Fender MIA Fender P-Basses: one a 2005 and the other a 2006. My 2005 P is strung with GHS Bass Boomers rounds and the 2006 P has...
I know this is the opposite of what most people like to do, but I would like to replace the soft switch in a POG Nano with a purely mechanical...
So I'm waiting for a train and due to a recent wipe of my iPhone I have limited music on it, which has led me to listen to the Blues Brothers OST...
I usually had DR Nickel Lo Riders (45-105) on my Music Man S.U.B. and they worked just fine, my setup was not too high and not too low, I liked...
I am selling my Audere ProZ preamp with 4 knobs and 1 switch. I bought it new, installed in my bass, used a few times. Sounds great but I went...
Hi, I recently picked up a used ESP Vintage Four bass. I'm really a precision guy but occasionally need the PJ configuration aswell. So I'll be...
Brand new, unused genuine Dingwall 4 way switch. $50.00 USD, PayPalled and shipped US and Canada addresses.
Hi all. I've had my amp for years and love it. I have never owned the switch. .... So which Trace foot switch goes with the Trace Elliot amp...
I have babied this pedal....but switch number 3 is stuck down....It loosens if I twist it and it pops back up. Took pedal apart, but cannot see...
[ATTACH] This is my fender active deluxe p bass special. I posted about this subject before but this time I gotta be more clear. If your looking...
I have a jazz bass with a Musicman pickup in the bridge position, I want to install a 3-way mini toggle into the musicman pickup service which...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] TC Electronic Staccato '51 bass amp head in great lightly used...
Can u add a toggel and a passive tone pot to any active pre to make it an active/passive bass?
![GuMMBi]:{>](https://images.talkbass.com/data/avatars/s/147/147429.jpg?1442590915){kind=small}
