Separate names with a comma.
I recently scored an awesome Tele neck off a fellow TB'r. Thanks again @pbassnut . Because of the long trip from VA to TX, the neck had an ever so...
I just heard of this now. [MEDIA] What do you guys think?
I'm in the midst of doing some learnin' of how to fix some junked necks. The particular specimens in question are forward bowed Squiers from the...
Hello, I own an American Standard J bass and I've noticed that it has the truss rode hole at the center of where the fretboard meets the body....
Edit: I solved this problem. See post #17 for more information On my first build I used and LMI double action truss rod (Truss Rod, double...
I have an Ibanez BTB7 7-string bass, which has two truss rods. I plan to put tapewounds on the lower 6 strings which will lower the tension quite...
Hi, I have an Ibanez BTB 1606 thru neck that has a truss rod nut that is frozen solid and stripped. Tried penetrating oil and heat and still...
Hi guys, I just scored this one with a pair of EMG 40CS for a bill but it shows the typical signs of negligence on top of the glued back together...
http://www.hobbyking.com/hobbyking/store/catalog/47622(2).jpg http://www.acousticmasters.com/SingleRod.jpg What do you think about put a rod...
Update on Mendel neck. I definitely maxed it out. I was able to get a few turns using some excess brute force but when I tried turning it again,...
i recently had a T-40 with a truss rod that was impossible to get a wrench onto - i was using the 5/16" gibson style "crackpipe" wrench. the nut...
I am in the process of building a few projects. So far, you have been a monumental help. I received my truss rods a few days ago. I noticed they...
Hi all, I've got a Modulus Q5 with a truss rod. I have a studio session in the next couple of days and need to tune 1/2 step lower for that, i.d....
I am still puzzled by the bass manufacturers who build instruments that do not have easy access to the truss rod. I am very particular about the...
Title say's it all....wondering if I just mill out the skunk stripe to get it out...any Advice would be apreciated...thanks guys...
I am hoping that some kind person can help me identify the truss rod/nut in a bass that I have. The truss rod is not adjusting correctly so it is...
The action of my bass is high and i would like to lower the fap between the board and the strings. The trussrod nut is on the headstock. How...
This Truss Rod Cover came off a 1979 Rickenbacker 4001 bass. It is in good condition and the photos shown in this listing show that. PayPal only...
Cleaning out the bass tool box and have too many of these. Two Fender 3/16" T-Shaped Truss Rod Tools for American Fenders for sale, both in good...
Andyone know the size of korean squier bass neck truss rod wrench All the best
I bought a late 90's Peavey Foundation 5 a few years ago off ebay. The first time I had any need to adjust the neck was earlier this year and I...
So I'm still working on a Grabber copy I was working on 5 months ago... and this is truly my first full bass build, and I've been wondering if I...
Two Fender 3/16" T-Shaped Truss Rod Tools One still in the plastic, other appears unused. These usually come with the American Standard \...
I am selling a Fender, made in US, Precision tort pick guard, 13 hole with truss rod adjustment cut out, circa 1999. Great condition just...
Does anyone have a source for a spoke wheel nut that will fit on a heal adjust All parts neck. I am not sure of the thread size. I am assuming its...
Relist
Hi folks, I have a late 60's Baldwin 704 model bass. The truss rod needs to be adjusted and I don't have a wrench for it. Does anyone have any...
Oh no! So my Levinson Blade P bass now has a strange thunk inside the neck. This happens when I rock it back and forth. I also hear unwanted...
Good afternoon everyone I have been reading more and more builders that are using silicone to help with undesired vibrations and possibility...
Hi all.. forgive the question, but I've exhaused Yamaha Europe as a source of information.. 'kin useless. I want to order a truss rod wrench but...
I have a parts bass that I'm finishing and I need a source for a custom engraved thunderbird bass truss rod cover. I also need a cover for my main...
Installing a Fender neck that has been in storage. I need to add tension to the truss rod that was loosened for storage. Any suggestions on the...
I have been building for only a short period of time...but have been playing for many years...My next build is a 6 string... ** Specs of...
I was looking through basses that are being sold as a second hand on a internet site. And i realized that most of the people were saying that...
So, the vintage black eagle has just perfect, insanely low action. I wanted to replicate that on my reissue. Bought a Groovetech multitool from...
I have a super lightweight precision-style bass body. Insanely light. I would like to order a custom, lightweight roasted maple neck for it....
Hello fellow bassists Growler571 here. I have a 2004 Am Standard Precision bass that has a neck that is warped inward and I have tightened the...
Hello everyone Growler571 here. I have a 2004 Fender Am Standard P bass that has a neck that is slightly bowed inward at the first 3 frets or or...
I have for sale a truss rod cover from a Rickenbacker 4004. The lettering on these is gold. The screw mounting pattern is the same one RIC's been...
LMI is now taking 3+ weeks to make custom sized ones. I install from the body end and like them to have a total length of 26.5" BBG truss rods...
I am considering buying a used Roger Waters P Bass, apparently in good conditions. I have noticed that the neck (with maple fretboard) has no...
Hello. I am wondering how long i can have my bass without strings on it without needing to loosen the truss rod. I have a 5 string 34" with...
Would you keep it and do the washer trick sell it and do the washer trick other!! please explain your choice. I just went to adjust my MIM...
[update] While this thread is chock full of useful information and suggestions, anyone who landed here for help might want to jump straight to...
I took one of my basses out that I rarely play and noticed the truss rod had slipped out of the neck slightly (sticking out into the body cutout...
Hi all! Today I've found a problem trying to fix the truss rod of my ibanez btb 506. This bass has 2 different truss rod and the one on the left...
Hi, I'm brand new here, looks like a great community. I recently picked up a used Epiphone EB-0, and have found the truss rod adjuster to be very...
I have a Fender Jaguar Modified HB bass and I have reached the end of the threads of my truss rod. That is to say, I cannot seem to tighten it...
Hi, I'd like to come up with a two-way truss rod retrofit to an existing neck. The goal is to rescue one of my old and (sentimental to me) bass...
Fender Roadworn Mike Dirnt neck (broken truss rod) Just purchased this- about a month ago- then the 'unthinkable' happened... just 'one more'...
Back story....a friend of mine bought this '04 new over 10 years ago and never really used it. The guy just likes to buy gear(all kinds of...
Is there a method or tool for adjusting a heel-side truss rod on a modern Jazz Bass without removing the pickguard or neck? The slot in my...
I've been playing and gigging my Steinberger Spirit XZ-25 pretty much as-is ever since I bought it off of Ebay. Came from FL, was previously...
Hello all, I dutifully used the search function and found a few things, but none pertaining to the kind of neck I'm dealing with. Here's a pic...
I'd like to trade my black Ric truss rod cover for your white truss rod cover. Let me know if interested. [ATTACH]
Hey all, I recently bought a MP Jag for a really sweet deal off Craigslist. Only issue I've got with it is that the truss rod nut is totally...
I have a bass with a truss rod nuit that is close to being stripped out. Apparently irt was like that when I bought the bass and I never had to...
Anyone know what size wrench is needed? 5 mm too big, Fender 3/16" too big, 4 mm fits but feels really sloppy. Intonation is off on the G string...
i have a shortscale Squier jaguar with what I believe is a broken truss rod. (I went to adjust the nut and now it just spins.) The hex hole is not...
I recently came into possession of a fantastic of a Fender '62 stack-knob Fullerton reissue (1986) that I absolutely love. I have found, however,...
