Separate names with a comma.
Hey everyone, first time poster here. I've been lurking for a long time and the collective knowledge here is pretty mind boggling. So anyway, I...
Im selling a Dunlop DVP4 mini volume/expression pedal. Its always good to have a volume pedal on hand but my current setup doesn't have room, and...
I have exhausted myself trying to figure this out, and have brought my bass in to a local repair shop numerous times. I built a bass using a...
Excellent condition Eventide ModFactor w/ AC Adapter- $175 I bought this and used it briefly, but lately don’t use any effects in my current...
Hey ! I got a Pelitaur Fuzz (2 in 1 velcro fuzz / green russian scooped muff) and the output knob on the manufacturer's website is only described...
Hi, I have problems amplifiing live gigs. I used to play at lower volumes and was very happy with the sound of my set up (DPA 4099-microphone and...
Background on my rig and situation: Playing a passive P bass through a Hartke LH1000 (1,000 watts) and a matching set of Hydrive 8 ohm cabs: 1x15...
Hi, I’m fairly new to running a pedal board, I have mainly always played clean until recently. My question is this: Say I’m sounchecking, and...
Hi. I'm preparing long post and one detail got me thinking. As far as pots are concerned I like to connect signal into lug2 (wiper) and have it...
Volume level drops significantly for no apparent reason, then comes back when I move the Gain dial. Otherwise, great amp. Any ideas about the...
Question for the TB community. I have a project in mind, and will spare you the details, but one question I have to make it work is as follows....
Hi guys, I just got an Acoustic B410C cabinet (400W) that I'm powering via my Ampeg BA-210 V2 (450W). The Acoustic cab has an 8ohm impedance,...
Hi all, I'm pretty close to jumping on a new Ampeg pf 350. My only concern is if it'll have enough volume at band rehearsals. I'm not worried...
Hello to all (all around the world of bass/upright)… I face a big deal. I would like to add drive/disto to the sound of my bass, while playing,...
Hi everyone! Well I called this thread a Volume Pedal, because I'm looking for a passive volume pedal, obviously, but I have one question - let's...
so I have a wonderful svt ii pro and I love it but to keep up at practice I have to have it around noon on the master (gain around 11 oclock)....
I have a bass that needs a new volume pot. The current one is scratchy and creates a huge amount of static when i adjust it. Being the volume...
Hi. Planning to buy a volume pedal, I purchased online an EB VP Junior 250k. Nere come the first mistake, I suppose, since I was planning to put...
I have always wanted to do some modifications to a bass as a learning experience and, after much internet (Talkbass is amazing!) and youtube time,...
Hi! After my last great experience here on TB I have another nut to crack for you guys. My amp has a 3,5mm stereo input for auxiliary sound...
hey there, if I'd run a 2x10 cab OR a 4x10 cab (at the same volume) would there be a noticable tonal difference, or a difference in...
MXR Bass Octave Deluxe M288 - $85 shipped- this pedal is a few years old. there is one defect on the pedal where the paint has chipped. aside from...
Hello, first post on here. Love the site. I'm in a 4 piece cover band based in the UK. We do a lot of Indie/ Britpop stuff. Oasis, The Stone...
Hello What's difference in volume, magnetism between steel and nickel string ? i have noticed that sunbeam have more output than the Hi beam, Do...
Hi, I have an rumble 15 amp. I plug my laptop to the aux and play some drums on youtube. I like to practice that way. But I have noticed that the...
Morley Optical Volume Pedal Made in USA No Power Supply $50 Shipped CONUS [ATTACH] [ATTACH] [ATTACH]
Continued from a thread about loud guitar players: Tonight I did a big band gig (playing and leading the band), big hall, 6-700 people, dinner...
I play in a cover band and we play small bars and clubs. We have a PA we set up on-site and a sound guy who is pretty good. I put my Genz Benz 9.0...
I have repeatedly tried to make an octave pedal with a blend control instead of separate dry and octave volume controls work but have finally...
Does anyone know if there is a aftermarket replacement for this? Our club foot singer knocked my bass over and broke the pot, it's volume and...
I have a Walkabout 4ohm 1x12 combo that I really like a lot. I just picked up another walkabout head (withouth the combo). I could wait for a...
I thought I read somewhere that 15" drivers form their maximum volume much farther away than 10" drivers, and that the bass player might think...
After 10 months in the shop, George and his staff gave birth to this new baby. VF5-J with a Birdseye Maple fingerboard, Pearloid block inlays,...
I'm considering purchasing the Traynor SB500H head. From what I am hearing, it sounds like a great little amp for the price. I am little...
I have recently noticed a volume issue while playing a gig (swing/big band). For the first 90 minutes of playing, the volume was perfect. I then...
I recently notice that some bass, like sire v7, is very loud when playing without amp/cab, just unplugged. But the bass I built by my own, is...
So I got a weird thing going on with my Sire V7. I was playing it earlier thru my CMD102 combo and noticed the volume sorta dimmed out of the...
[ATTACH] When I rearranged my pedal chain this morning upon completion there was severe volume loss that wasn't there before. All patch and power...
My rig runs hot, boosted, and active. My volume pedal can't take it. Over time, it has developed a terrible hiss. Is there a modification or...
I have a '78 p-bass that has a volume pot that works but stops when the knob is turned up past 9. I replaced the volume pot with a brand new pot...
