wiring

I've got an old jazz-style bass and want to try some different ways to wire it up sticking with the two pickups (Bartollini quads) and three pots....

[ATTACH] I was trying to figure out a wiring hack that allows me to use a rick-o sound like thing only using one of these switches but I’m not...

[ATTACH] I was trying to figure out a wiring hack that allows me to use a rick-o sound like thing only using one of these switches but I’m not...

TONE MONSTER SBK-3A Bass Guitar Preamp Balance Volume Treble Middle/Sweep Bass | eBay So, I'm planning on getting the above to replace my noisy...

Hey guys! I'm swapping out the electronics on this bass. The old preamp was shotty, so my customer decided to install an <a href="EMG Pickups /...

Hi, Let me first attach a picture of my guitar: [ATTACH] It's an Aguilar-equipped Yamaha. It's rather quiet, but not completely silent, there...

Hi! So I’m taking the plunge and buying a Tech 21 Sansamp RBI! Now, in an ideal world I want to use it along with my amps pre amp as a second...

Hello all! I currently have a Fender Bassman 410 neo cab that is getting new speakers and I had a few questions before wiring it. As a little...

Hi, I bought a 2nd hand EMG active p-bass pickup that I've been trying to wire up, and having some difficulties. I have a Fender p-bass deluxe...

I'm helping a friend with wiring an 80s Ibby. The cavity wiring is solid. There's an issue with the pickups sounding a little TOO thin/lowered...

I recently bought a used used toby and the active pot has been removed from the pick up circuit. The bass still produces sound. With out the...

I needed to get my Squier Jaguar VM Active bass back up and running and ran into issues. So not believing that I could fix the active circuitry...

Does anyone know if the Jackson pickups have plug connections similar to the EMGs they use in some models?

Hey all, I am looking for a second set of eyes on this wiring diagram. I'm going for a P/MM setup with a five-way rotary switch and can't quite...

Hi, I am looking at wiring diagrams to try an rewire my bass cabinet. http://www.rocketroberts.com/techart/images/spk_4_par.gif Problem is, I...

Hey guys, I was wondering if anyone had a Ripper II bass that they didn’t mind taking a picture of the wiring for me. I have a set of the Seymour...

The BL when soloed sounds great. The jazz pickup soloed sounds the way it should, but both together sounds like a radio. I found this: GZR P/J...

Jazz bass wiring harness (prewired), Volume/Blend/Tone configuration. 2 - CTS 250K split shaft control pots, a CTS 250K blend pot, a Sprague...

Then Instructions for wiring seem to be pretty straight forword. Red Wire to center of volume pot. Green wire to back of each volume pot. solder...

2 vol. No tone 1 output. And go....

Hi - I recently acquired an original Hammon Darkstar [ Guild spacing version ] which came with a tubed covered 3 wire harness . The two coated...

These parts were from a Washburn bass. So the pickups and passive wiring is all Washburn. The Grover tuners work fine, but I don't need them....

Custom wired standard Jazz loom, V/V/T, all CTS hardware, in unused condition. $25 shipped CONUS

[ATTACH] So that's the basic idea. Might as well use a master tone for both pups (yeah preamps are cool and all but I think a good old tone is...

I'm thinking of doing a simple wiring mod to my Washburn Status. I have put a set of La Bella stainless steel flat wound strings on it which has...

I'm getting closer to completion of the 10 1/2 year restoration on this big boy fridge. It had been rewired by previous owner for use as a DJ...

Hi All. I am building a J Bass and have a question regarding the pickup wiring. First, I cannot find any schematics or diagrams anywhere for this...

Hi guys! I really like each kind of DIY, however electronics is still my weak point. I've bought an old japan jazz bass for repair recently. It's...

Can anyone help me make some sense of this? I've had this bass for years, and I fineally want to do something with it. it's super old, beat up...

I know there is a very informative thread on impedance and wattage on here somewhere, but I want clarify something. I’m looking to build a 4x10....

Ok. So in a fit of irritation I decided to pull the preamp and knobs out of my Yamaha RBX JM2 because the knobs are scrathy and the preamp hisses....

I'm sorry if this has been covered but searching past threads has just uncovered a lot of ric o sound stuff that's confusing me. I have a 2...

So I opened my 2006 Hwy1 Jazz Bass and I found out that the 250k tone pot has two caps, one standard .02uF on the 3rd lug to ground and a second...

G'day, I've had my P Bass gutted for a DiMarzio Willpower Humbucker in the neck and a Nordstrand Big Blade near the bridge and I'm putting a...

I'll post the questions first, the background and info behind the questions can be found in my long winded post below. I have searched TB and...

I finally got myself a SpectorCore 4 fretless, and it is beyond my expectations! Has anyone tried to "Ric-O-Sound" it? I mean, separate outputs...

I have a MIM Precision Bass and would like to install a switch that mutes the signal to the output jack without changing its look. I figured using...

Hi, Can anyone post a pic of the Decade Bass wiring diagram and a list of the Lakland Chisonic pickup wire color codes? Is the neck white, red,...

First off, thanks for the help and sorry to clog up the forum with another wiring help thread. So, I've installed Aguilar DCBs with a Darkglass...