SOLD $10 for both MIJ Laminate and Dean bodies, a pup and some parts.

$10+ shipping for everything!
Local Pickup for $7. This stuff needs to go

Dean Body + Hardware
This body might have been modified for the peavey neck it had when I got it. Read on for details. Body is solid wood, probably basswood or something similar. From an Edge or Playmate bass.

Pickup Route is a bit bigger than 4" x 1.5" which is the same size as an EMG 40

It's got some dings and chips on it as well, this one at the bottom is the worst.

I thought the pocket might have been sanded to fit the Peavey neck, but if it was it wasn't much because the blue paint at the base of the pocket goes right to the edge. Perhaps it was sanded to fit for the original dean neck? Pocket is 63mm wide and 17mm deep.


The original hardware below will be included plus the necessary screws to affix it all.


Dean Edge Pickup.

I actually quite like the sound of this pickup. Thick, clear and even sounding. I'm still considering using it in another project, but I'll give first dibs to the person who buys the body. It's EMG 40 size.

Laminate short scale MIJ body.
I was told this came from a 60's MIJ short scale bass but I really have no idea. The bridge position and pickup routes and body length suggest that it could probably be made into a full scale bass or even a guitar as there's lots of space to play with bridge positions.


Neck pocket is 2.25" wide.


To help you with an idea of size




Feel free to ask any questions you might have about this stuff. Thanks for looking!

 

Yep, neck is gone.

Still got the body if anyone is interested.