Dismiss Notice

Psst... Ready to join TalkBass and start posting, make new friends, sell your gear, and more?  Register your free account in 30 seconds.

2x10 or 1x12 for added volume Extension and/or Quieter gigs

Discussion in 'Amps and Cabs [BG]' started by thewanderer24, Jun 29, 2004.


  1. thewanderer24

    thewanderer24

    Apr 29, 2002
    SJ, CA
    OK, this might seem a little strange.

    I am thinking about a getting another cabinet that can be used for lower volume gigs, or rehearsals, but that can also be used as an extension for high volume gigs.

    I would like something 4 ohms. I have an Eden WT400 head that I could use with it alone. I have a Stewart 2.1 Power Amp that is usually driving a Bergantino HT322 on most gigs.

    The stewart amp can supposedly handle a 2 ohm load per channel, and would deliver about 1000W to the two speakers in this configuration. Should be fine for the HT322, but anyone have a recomendation of a 1x12 or 2x10 they use for a similar purpose??? Money isn't really an issue.

    I gig mostly rock, funk, and classic rock, with the hope of doing Jazz within the next year or so.