1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

3 Way switch AND Blend Knob?

Discussion in 'Pickups & Electronics [BG]' started by KablesP, Jan 20, 2014.


  1. KablesP

    KablesP

    Oct 29, 2013
    Is it possible to have a 3 way switch to determine which pickups are affected by the blend knob? The switch would select 2 of the three pickups which would then be blended between each other.

    So...
    Position 1 the blend knob controls Neck+Mid
    Position 2 controls Mid and Bridge
    Position 3 controls Neck and Bridge.


    This way all combinations are available as well as all solo. Well, I can't use all 3 pickups at once but how often does that sound good...


    I am assuming this is possible. I always wondered how people used more than 2 pickups with a Blend knob.
     
  2. You will need a DP3T switch.

    In you are going to use a mini toggle switch, this will take the form of a 4PDT On/On/On switch, but the switching pattern will be configured by external jumpering.