1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

34" B strings

Discussion in 'Strings [BG]' started by Maurice ElDarko, Nov 2, 2001.

  1. Wondering what a good string set and gauge would be for my 6 string, bearing in mind it's 34" so I'm thinkin something thick

    The one's the put on it when they shipped her out were really light and they B is crap and hard to tune. I played the same bass in the shops floor stock and the strings were much tighter.

    Any thoughts

  2. CS


    Dec 11, 1999
    I use Elites on my EB MM 5 I did use a 130 but went to 125 and prefer it. Anyway your thread gets bumped.
  3. lo-end


    Jun 15, 2001
    get some DR low riders. They have the hex cores so they are tighter. I would also recommend a .130 B string since its thicker and tighter.

    Low riders + .130 B = one tight ass B string. :D ;)
  4. john turner

    john turner You don't want to do that. Trust me. Staff Member

    Mar 14, 2000
    atlanta ga
    non-taper cored b's are going to be much harder to tune and intonate properly.

    i would suggest giving dean markley sr2000's a try - they've worked wonderfully for me.

Share This Page