'60's Kent (Teisco) short scale replacement pickup?

Discussion in 'Pickups & Electronics [BG]' started by bwildt, Aug 1, 2020.


  1. bwildt

    bwildt

    Mar 21, 2017
    Wichita, Kansas
    I'm trying to find a replacement pickup for a '60's Kent (Teisco) 24-3/4" scale bass. The original pickup is quite microphonic. I have not pulled it out to see if it might be able to be potted or something. Any suggestions on where to find a replacement would be appreciated. Pics are attached. Ideally, I would like a drop-in replacement, so I could restore to the old pickup if I wanted. However, I would consider something that might require some modifications. The bass is an interesting old bass, but not a prized collectible.

    The pickup is mounted to the pickguard, with mounting ears on the bottom plate of the pickup. The original appears to be a single-coil. I would consider any format for the replacement (single, stack, humbucker).

    An attached pic has the dimensions of the original. In short, the pickup body is 3-3/8" x 1-3/16". The string spacing G to E is 2". Metric conversion of dimensions is included in the picture.

    TIA for any suggestions.
    Bob

    IMG_1692.JPG IMG_1693.JPG IMG_1694.JPG
     
  2. Primary

    Primary TB Assistant

    Here are some related products that TB members are talking about. Clicking on a product will take you to TB’s partner, Primary, where you can find links to TB discussions about these products.

     
    Jun 20, 2021

Share This Page