Hey fellow low Enders ! So ! I’m wanting to put in an a b y switch to shift between amps, but how do I get them to receive signal of my effects pedalboard Amps I will be switching between are Fender Rumble 100 combo and my half stack rumble 500 and 4x10 Switch I will be integrating is the morley pro aby, This a whole new thing for me.. Cheers and blessings Alexander If there is anything I’m missing in the post I’ll reply to your comment !
hmm, well if your using the same pedal board for both amps, and if I understand what you want to do, I believe you will just: run your bass into your pedal board, then the output from the last pedal goes to the input jack on the Morley, then you send output A to your first amp, and output B to your second amp. Bass=> Pedal Board=> Morley In: A => Fender Rumble 100 combo B => Fender Rumble 500 + 410 cab switch as needed, options are: A or B .... or .... A and B FWIW, I have a Morley ABC pedal around here so I'm somewhat familiar with switching, but I don't use it these days so I may have missed something, but I'm pretty sure that's what you need to do. good luck
Thanks so much for your help on my posts ! It is much appreciated, I will run it up that way Cheers and blesssings Alexander
Here are some related products that TB members are talking about. Clicking on a product will take you to TB’s partner, Primary, where you can find links to TB discussions about these products. Browser not compatible