1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Active and Passive inputs.

Discussion in 'Amps and Cabs [BG]' started by harley_ou812, Jan 24, 2002.

  1. I have a Hartke HA-7000 andI am wondering if it would be ok to have My acoustic plugged in to the active input and my Electric in the Passive input at the same time if i turn the volume doown on the one i am not using.... ( I am asking sinse I am going to be playing a gig where i will need both basses and dont wanna have to be switching cables
  2. White_Knight


    Mar 19, 2000
    To be honest, it will depend upon that amp. I don't have any experience with Hartke amps, so I honestly don't know. One thing that I have noticed though, is that the active input just seems to be a passive input that has a cut in it's signal level. On many amps, the inputs are simply wired in parallel with some sort of signal limiter on one of them. If that's the case, then it would work just fine. Check your manual or e-mail Hartke. Perhaps someone else would know around here...

Share This Page