1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

add LED's

Discussion in 'Effects [BG]' started by jaebee, Aug 22, 2007.


  1. jaebee

    jaebee

    Mar 16, 2007
    hey, just got a radial fx looper from a fellow tb'r, and it works great.

    only problem is there are no LED's to signal if the loop is on or off.

    how do i need to wire 2 LED's to accomplish this (i realize i would be adding a 9.v. as its a passive loop)

    sorry if this is in the wrong section

    thank you
     
  2. Well, perhaps the wrong forum! Try diystompboxes.com, but whatever you do, make sure you search FIRST!

    This topic has come up here before, and you should find some stuff if you search, but you're bound to find more detail at the above forum.

    I would first work out if you have any spare terminals on the switch, because if you don't then you won't have anything to switch the LED with.
     

Share This Page