1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Adjusting truss rod and bridge height FRETLESS StingRay

Discussion in 'Hardware, Setup & Repair [BG]' started by puriegas, Feb 4, 2005.


  1. puriegas

    puriegas

    Feb 4, 2005
    Mexico
    I just got a 20th anniversary Fretless Sting Ray.

    I adjusted the truss rod and the height of the bridge and it feels and sounds very good in almost all of the strings and notes except for the C note in the A string (third freet position) where I get a really bad buzz, the curious thing is that in the same string in a lower or higher notes I do not get the buzz. Also, when I play a C note on the E string (8th fret position) I get also a buzz, it is not as bad as the one in the A string but it is still there.

    I do not know If I did a bad job at adjusting this and I am looking for a “step by Step” instructions on how to adjust the truss rod and height to see If I get the problem solved.

    Any suggestions?