1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Adjusting Tweeter/Bi-amp & Fullrange mode on GK cab

Discussion in 'Amps and Cabs [BG]' started by Tokonuk, Aug 3, 2017.


  1. Tokonuk

    Tokonuk

    Jul 4, 2016
    Hey all, bit of a noob question.

    After realizing my 410 sbx cab's tweeter was shot, I put it in bi-amp mode to bypass the crossover & tweeter altogether, to bring back some brightness to the woofers. (My 400RB is connected with a normal 1/4 in, since it's not biampable anyways)

    Even after replacing the tweeter, I still plan on doing this and attenuating the tweeter with knob on the back quite often because I usually play with a ton of dirt, sometimes my B7K and Agro at the same time. My question is does using either of these controls while the amp is powered on damage anything?

    It'd be nice to know if I didn't need to turn my amp off every time I wanna A&B settings.
    Also, how easy is it to install a new tweeter??? Thanks!
     
  2. AdamR

    AdamR Supporting Member

    Sep 24, 2007
    Bethel CT
    Your safe to adjust with the amp on.
     

Share This Page