For Sale Aer Basscube Two, very rare used.

AER Basscube Two, that has seen very little use. Top of the line model for AER.
Original cover. I have the original shipping box as well.
Ships from Nova Scotia, Canada, B3Z4R3.

AER Basscube 2 550W Combo Amp
ae00-2546
The BassCube 2 has proven to do an excellent job to reproduce double bass authentically. Now, in its 2nd generation AER has identified a real coaxial speaker-system (12“ and a 1“ horn) that works extremely well in its very small bass-reflex cabinet. It has lost some weight and is much clearer in its functions and features. AER has also implemented new advanced dynamic control technology and have extended the dynamic range substantially. Driven by the new AER 550 W/8 ohm class d power amp the BassCube 2 has got the power to go down to the lowest frequencies in an effortless manner.

Well balanced analogue sound design covers the ranges gently and proportionate so that tone stays always clear, crisp and transparent yet powerful and defined without any stress! Its two channels are equally equipped and allow two different instruments set up in all comfort – and be sure it work very well for electric bass too.

Whether ‘arco’ or ‘pizzicato’ – the BassCube 2 sounds like your bass: round and open – you can hear the stroke of your bow as true to life as the placing of your fingers on the fingerboard.

Model: BassCube 2 (BCU)
Twin-channel 2-way coaxial system, 550 watt
Channel 1 and 2 equally equipped with:
combined XLR/6.3 mm (1/4“) input jack socket
to access the pre-amp section with 6 presets
(to be addressed by mode switch)
• Piezo: sources with piezo level, instruments with passive
pickup systems only
• Line: sources with line level, instruments with
active pre-amps and/or magnetic pickups
• 9V: phantom power supply for line function, activated by
keeping the mode switch pushed for 3 seconds
• Mic: sources with microphone level, balanced or unbalanced
• 48V: phantom power supply microphone function, activated
by keeping the mode switch pushed for 3 seconds
• E/P: electret-microphone / piezo - blender mode. Twin signal
is directly passed to channel 1 and 2 by stereo cable.
EQ: 3-band-EQ with parametric
mid-range and contour
Eff ect: compressor with ratio and threshold, notch-filter
with frequency, level and bandwidth switch
Power amp: class d, 550 W/8 ohm RMS, dynamic control
Speaker: two-way coaxial neodymium speaker system,
12“ bass plus 1“ HF driver
Crossover: two-way, fc = 3.9 kHz, 12dB/oct.
Features: AUX-in, tuner-, line-out, effect loop,
footswitch: channel mute, ensemble/solo
Specials:
AUX-out, monitor, subbass, hf level
Accessories:
SoftCover
Cabinet:
0.7“ (18 mm) birch plywood
Finish:
waterbased acrylic, black spatter finish
Dimensions:
405 mm x 405 mm x 365 mm
(15.9“ x 15.9“x 14.37“), HxWxD
Weight: 20 kg (44 lbs)

 

Yes ,...still here.

 

Mix up. The Basscube is long gone, but I still have an AER Basic Performer Bass for sale.