1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Aguilar OBP1+Warwick Streamer LX

Discussion in 'Pickups & Electronics [BG]' started by ropie, Apr 5, 2005.


  1. ropie

    ropie

    Nov 25, 2004
    I installed, or I should say, tried to install an Aguilar OBP1 preamp in my Warwick Streamer LX 6 (Basslines soapbar pickups)

    Issue n°1 : no sound when the balance pot is in central position. when I unwire the red cable on the balance pot (see the first drawing on www.aguilaramp.com/html/support/downloads/diagrams/diagramobp1.htm ) i get some sound, but I think it's "wrong".

    Issue n°2 : The sound is distorted!

    Issue n°3 : No idea how to ground the whole thing. but when I touch a pot, I can hear a lot of radio stations

    :meh:

    thanks for helping me.
     
  2. David Wilson

    David Wilson Administrator Staff Member Administrator Supporting Member

    Oct 14, 2002
    Lower Westchester, NY
    did you wire it exactly as per the diagram?
    Obviously you also spliced in the active pickup battery wires with the red battery wire and obp-1 red wire?
    Apart from that, I can't really help too much more without pictures
     
  3. Lockout

    Lockout

    Dec 24, 2002
    Illinois
    Try wiring it like this instead: http://www.stewmac.com/freeinfo/i-4137.html

    I had the same problem when I installed a blend pot in one of my basses, and I found out that the diagram I had been following was opposite of the diagram above, so I rewired it and that fixed the problem.