1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  


Discussion in 'Amps and Cabs [BG]' started by ThumbFreak, Oct 23, 2006.

  1. ThumbFreak


    Oct 1, 2006
    Ok, I have a disscontinued ampeg B2 combo with 4X8s but thats not what I think the problem is. The problem is that when ever I hit a low note or a high note on the E and A string there is this terible buzz/speaker raddle noise that comes on after I would say about a 1.5 sec. and rings though almost the entire note some times it stops some times it doesnt, and I checked the speakers and they are fine... if anyone knows what I can possibly do to fix this that would be great.


  2. fdeck

    fdeck Supporting Member Commercial User

    Mar 20, 2004
    Madison WI
    HPF Technology LLC
    You must have a screw loose. :bag:

    But seriously, I would try gently snugging up on all of the exposed screw heads. Do it very gently, as you can easily strip out screws going into the cab. Next, check the nuts holding down the front panel jacks and controls. And I know it seems simple, but it could even be a signal or speaker plug with a loose cap. Does the amp have removable casters?

    Are you sure it's from your amp, and not something in your house buzzing?

    That's about all you can do without opening up.
  3. Primary

    Primary TB Assistant

    Here are some related products that TB members are talking about. Clicking on a product will take you to TB’s partner, Primary, where you can find links to TB discussions about these products.

    Jan 19, 2021

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.