1. Please take 30 seconds to register your free account to post, make friends, earn reward points at our store, remove most ads and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Ampeg BA115 users....

Discussion in 'Amps and Cabs [BG]' started by lateralus_84, May 13, 2003.


  1. lateralus_84

    lateralus_84

    May 10, 2003
    Hey all you Ampeg BA115 users.... I was curious: what settings do you use on your amp to be able to be heard through a distorted guitar?
     
  2. lateralus_84

    lateralus_84

    May 10, 2003
    Also... what settings on your bass if you have active pickups?
     
  3. ibanezman80

    ibanezman80

    May 7, 2003
    Canada
    I have a BA210 (basically the same thing) and play in a rock band (with distortion guitar:bassist: ). I use the 2nd wave setting and usually have something like bass=7, mid=6, high=7 (or lower). I find that this amp sucks for playing in a rock band because it needs more volume but i can't afford a new one. However i'd definately recommend it for starting out.
     
  4. ibanezman80

    ibanezman80

    May 7, 2003
    Canada
    For the active EQ on my bass settings (SDGR 405), I turn the bass down a little from full, put mid around half way, and since the high does like nothing, i just put it down a little from full. I also put the pick-up setting around half between both but usually more towards the duller tone (closer to the bridge)