1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Ampeg SVP-BSP: 110 to 220 V conversion

Discussion in 'Amps and Cabs [BG]' started by Low_blow, Jul 23, 2012.

  1. Low_blow


    May 14, 2005
    I bought a used Ampeg SVP-BSP from Ebay. I know, its power supply can be wired to work from 110 or 220 V. Has anybody made that or maybe somebody even have a diagram? Thanks.
  2. Jerrold Tiers

    Jerrold Tiers

    Nov 14, 2003
    St Louis
    For 120V, the black wire in the mains circuit is on J26, and the brown wire on J27.

    For 220V, the brown is on J26, and the black on J27.

    In either case, a white wire should be on J29

    J27 is just a "storage" position (so is J28), J26 /J29 are where the mains power is.
  3. Low_blow


    May 14, 2005
    Thanks a lot!
    Now it works!
    It was so simple.
    p.s. Sorry for the mistake in the thread. I meant: "120 to 220 V".

Share This Page