/ Register

Ampeg SVT 4-Pro problem

Discussion in 'Amps and Cabs [BG]' started by FFABass, Jul 21, 2009.

  1. Jul 21, 2009 #1
    FFABass

    FFABass

    Jul 20, 2009
    I'm new to this forum and I figured you guys could help me better than anyone. I have an Ampeg SVT 4 Pro and the peak LED has been blinking. This has been happening since the last show I played with the amp. I'm new to this amp, so I'm not sure what could be the issue. You can see the LED going off in the videos of my band playing, but I didn't realize it happened until after the show. Any ideas would be a great help. Thanks.
     
  2. Jul 21, 2009 #2
    bassman515

    bassman515

    Jun 15, 2007
    Noblesville, in
    It is ok for the peak light to blink when you are hitting your hardest notes. If you don't want that to happen, dial back you gain. How are your eq settings? Do you have any of the preshape buttons engaged?
     
  3. Jul 21, 2009 #3
    BassScum

    BassScum

    May 1, 2008
    So Cal
    I had the 4 pro for about nine years. Was your gain set higher then normal? Were you playing louder then normal? 4 pro's are known for the led blinking excessively. Don't worry they can take a lot.