1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Another impedance question

Discussion in 'Amps and Cabs [BG]' started by Scott Lynch, May 6, 2004.

  1. Scott Lynch

    Scott Lynch Supporting Member

    My SWR 350 has two 1/4" outs. if I hook it up to a single 8 ohm cab with two inputs, say an eden 410XLT or an aguilar GS212, will the resulting load be 4 ohms if i run both amp outs into both speaker ins?
  2. ESP-LTD


    Sep 9, 2001
    (I'll make a few assumptions here)

    On a solid state amp with 2 outputs, the outputs are in parallel.
    On a cab with 2 inputs, the 2 inputs are parallel.

    If you plug in a single 8 ohm cab into the head, it's 8 ohms.
    If you plug (2) 8 ohm cabs into the head, it's 4 ohms.
    If you plug an 8 ohm cab into the head, and another 8 ohm cab into the first 8 ohm cab, it's 4 ohms.