1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Another Model J / Audere question...

Discussion in 'Pickups & Electronics [BG]' started by Dan_reeves, Mar 2, 2017.


  1. Dan_reeves

    Dan_reeves

    Jun 14, 2013
    I did a search and read through some of the Model J/Audere posts, but did not see something answered that I was wondering. Audere is supposed to be a (mostly) solderless system - for those of you who have this set up, and are running series, did you still solder the black and white wire together for each pickup? And am I correct in that you do this for each pickup? In other words, don't solder all of the black and white wires together from both the neck and bridge pickups, correct? The preamp comes with the crimping deal for the bridge ground - could I use something similar on the black and white wires as well?

    Thanks - just making sure I am doing this right. I am in possession of the pickups, the preamp is in the mail.
     
  2. Dan_reeves

    Dan_reeves

    Jun 14, 2013
    Anybody?
     

Share This Page