Anti-Rattle mod for cabs w/metal grilles

Discussion in 'Amps and Cabs [BG]' started by Stu_Bass, Oct 29, 2016.

  1. Stu_Bass


    Nov 24, 2006
    I've taken to putting the loop (soft) part of velcro on the stand-offs for cabinets with metal grilles. It sticks to the stand-off via the adhesive and the velcro acts as an anti-rattle medium. I think it also acts as a bit of a compression/lock washer which helps prevent the fastener from coming loose. it works particularly well on cabs that have a piece of wooden trim on the entire outside edge of the cabinet.
    Last edited: Oct 29, 2016
    BadExample likes this.
  2. Al Kraft

    Al Kraft Supporting Member

    May 2, 2016
    Northern Virginia
    I used to use felt disks (like the kind you stick on the bottom of jewelry boxes and lamps), but this should work equally well if not better.
    Stu_Bass and BadExample like this.
  3. BadExample


    Jan 21, 2016
    Inner tube! The duct tape of the rubber world. Above idears are probably less fiddely, but your neighbor's kid's bike has two inner tubes ripe for the taking :laugh:
    Stu_Bass and Al Kraft like this.
  4. Primary

    Primary TB Assistant

    Here are some related products that TB members are talking about. Clicking on a product will take you to TB’s partner, Primary, where you can find links to TB discussions about these products.

    Jun 23, 2021

Share This Page