Hey guys, I'm looking for some help with re-wiring my Treble/True Treble knob. The original switch is being replaced by another one that David sent me. Unfortunately, I can't seem to find any wiring diagrams on his site as how to wire it up. It's a complete different pot from the original one, so that's where I'm a bit concerned. I did email David, but I was hoping to have this done by the weekend, and I doubt he'll get back to me by then. The original is wired as follows: layout is as if looking with the shafts on the top _____ shaft | ____________ stacked shaft | ____________ white/gray, yellow/gray, nothing black/green, green, white/green The new knob he sent me is a stacked knob, with what looks like a yellow capacitor stuck on the left side. I'm hoping that somebody here has the same Treble/True Treble setup, with this new knob - and can maybe post a pic or at least describe what wires are connected to which terminals on the pot. Thanks!