1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Applying a Wire Outer Jacket?

Discussion in 'Pickups & Electronics [BG]' started by rossiman, Aug 9, 2012.

  1. rossiman


    Aug 12, 2011
  2. Munjibunga

    Munjibunga Total Hyper-Elite Member Gold Supporting Member

    May 6, 2000
    San Diego (when not at Groom Lake)
    Independent Contractor to Bass San Diego
    Well, if you feel like cutting the wires and re-soldering them, you could put shrink tubing over it. However, if it were me, I'd probably just stuff the wires back in the jacket, secure the end cuts together with electrical tape and seal the longitudinal cut with liquid electrical tape.

  3. walterw

    walterw Supportive Fender Gold Supporting Member Commercial User

    Feb 20, 2009
    why bother? it makes no difference inside a control cavity where it won't get moved.

Share This Page