1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

BA115 Issue, please help.

Discussion in 'Amps and Cabs [BG]' started by vbisbest, Jan 5, 2012.

  1. vbisbest


    Jun 8, 2011
    Had my BA115 for about 2 years with no issues. One day after powering up the volume was cut in half and remains that way today. I have to run both volume and master wide open to get the same volume I was getting at about 5. There is no distortion at all, clean sound. The XLR out seems ok, normal signal strength. Any ideas?

    Thanks for your help,
  2. anderbass


    Dec 20, 2005
    Phoenix. Az.
    If your amp has a headphone jack, something easy you could try is plugging a (headphone or guitar) cord in/out of it a few times. Those headphone jacks have switching contacts that mute the amps speaker, sometimes dust/corrosion causes a poor connection and simply plugging a jack in/out a few times is all that's needed to clear up the problem.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.