Psst... Ready to join TalkBass and start posting, make new friends, sell your gear, and more?  Register your free account in 30 seconds.

Barrel Jack Wiring on Warwicks

Discussion in 'Pickups & Electronics [BG]' started by Mescalitodude, Nov 15, 2005.


  1. Mescalitodude

    Mescalitodude Guest

    Feb 10, 2005
    UK, Derby
    Hello,
    Sorry if this is already somewhere else on the board but I couldnt find it...

    I'm installing active pickups and passive electronics in my Warwick Corvette std. Im not that experienced in this area and got stuck when it came to wiring up the barrel jack.

    I have three wires:

    Black wire from the battery,
    Black wire from the pots (earth im guessing)
    White wire from the pots.

    Now the nibs on the barrel jack arnt the same as a standard one so I'm asking if anyone knows which wire goes where?

    Thanks
     
  2. Basschair

    Basschair .............. Staff Member Supporting Member

    Feb 5, 2004
    Stockton, Ca
  3. Mescalitodude

    Mescalitodude Guest

    Feb 10, 2005
    UK, Derby
    [​IMG]

    Looks like this
     
  4. Basschair

    Basschair .............. Staff Member Supporting Member

    Feb 5, 2004
    Stockton, Ca
    Ah yes, the red X in the white box...I see ;)

    Try attaching it again and we'll see what's up.
     
  5. Mescalitodude

    Mescalitodude Guest

    Feb 10, 2005
    UK, Derby
    weird, it works for me. I could email you the picture if you want
     
  6. Basschair

    Basschair .............. Staff Member Supporting Member

    Feb 5, 2004
    Stockton, Ca
    I tried it on my work comp and home comp, still won't come up. If you get a chance, email it to me at the address in my profile. Thanks!