Psst... Ready to join TalkBass and start posting, make new friends, sell your gear, and more?  Register your free account in 30 seconds.

Bartolini MMC pu wiring

Discussion in 'Pickups & Electronics [BG]' started by duckbutter, Sep 16, 2005.


  1. duckbutter

    duckbutter

    Mar 30, 2005
    Does anybody have a pic or diagram of what the wiring should look like on the back of the pup itself?
    I have a pretty old bart mm pup (early 90's), with no wires (an old project I started years ago, and never got aroud to...till now :) ).
    I have a way to go, but I want to finally get this project finished.

    I blame this all on TB (in a good way :D )
     
  2. duckbutter

    duckbutter

    Mar 30, 2005
    I've been to www.bartolini.net and found nothing as far as the actual pickup wires. :(
     
  3. A9X

    A9X

    Dec 27, 2003
    Sinny, Oztraya
    Looking at the bottom of mine, with the single mount on the left;

    top left - green
    top right - red
    bottom left - black
    bottom right - white
    centre (roughly inline with R and Wh) - shield.

    Bart wiring diagram
     
  4. duckbutter

    duckbutter

    Mar 30, 2005
  5. A9X

    A9X

    Dec 27, 2003
    Sinny, Oztraya
    That looks similar to the wire that came on it ex factory. But I normally just use any decent quality wire I have laying around.
     
  6. duckbutter

    duckbutter

    Mar 30, 2005
    Thanks, you've been a great help :D