1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Bass-Drive Mosfet problem . . .

Discussion in 'Effects [BG]' started by EthanTheHeathen, Feb 24, 2014.


  1. Ok, so I have a Bassdrive Mosfet and have never been able to hear the difference between the Mosfet/Standard settings. But then yesterday I was playing around with it and the Mosfet setting made some noise, then sounded much different than the standard, as if it is now working. This different sound was louder, more gritty, and less fizzy than the standard setting. To me, it sounded more like the Comp-cut setting, which is what I usually use, but possibly with more dirt.

    So here's my question: what's going on with my pedal? Does my description of the Mosfet sound match what it's supposed to sound like, or do you think the Mosfet/Standard switch is shorting out to the Comp-Cut mode somehow?

    I hope this makes sense to someone, it's hard to describe. Hope I can get it working!