1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Bazz Fuss wiring help needed

Discussion in 'Effects [BG]' started by MattS, Aug 9, 2012.


  1. MattS

    MattS

    Jan 17, 2011
    Cheshire, CT
    I'm working on experimenting with a bazz fuss circuit and I might make several with different caps/switch/possibly with a blend circuit. So I made a circuit experiment rig out of spare parts for me to swap parts easily.
    Can someone please help me with the diagram I have drawn up below? verify that it should work? I tried this lastnight and i couldn't get it to work, no sound came out. If I'm using electrolytic cap, which way does the negative go?

    [​IMG]
    [​IMG]
    [​IMG]

    I really appreciate it. Thank you.

    - Matt
     
  2. jwr

    jwr

    Jun 28, 2010
    Overland Park, KS
    Negative goes towards the ground.
     
  3. MattS

    MattS

    Jan 17, 2011
    Cheshire, CT
    does everything else in the wiring look correct?
     
  4. jwr

    jwr

    Jun 28, 2010
    Overland Park, KS
    It's really hard to tell with those pics. Is your diode oriented the same way as the schematic? It doesn't appear to be. But I could be looking at it wrong as well.
     

Share This Page