1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Behringer FCB1010 w/UNO chip

Discussion in 'For Sale: Effects and Pedals' started by cubanbass, Jan 16, 2012.


  1. cubanbass

    cubanbass Gold Supporting Member

    Feb 1, 2006
    Hoboken, NJ
    got this from TBer Gastric a while back and had planned to get all tech with it. Not gonna happen. This post is word for word from his post. It's still sitting in the box.

    Behringer FCB1010 with original box / documentation and the following additions / upgrades:

    * UNO chip, and printed UNO user manual. UNO gives you more control and programming capability, and "stomp box" mode so you can have one row of pedals function as virtual stomp boxes via MIDI CC or MIDI NOTE while the other row sends MIDI program changes. Tons of options.
    * 1/4" mono pass-thru jacks to send instrument signal from right side to back left side of the board (or visa versa). Quality long barrel Neutrik jacks and shielded instrument cable used.
    * Industrial loop velcro on bottom for securing to pedal boards, original rubber feet included.

    Works great, only minor/normal visual wear. Velcro and audio pass-thru makes it easy to incorporate onto a normal pedal board. I had it on a PedalTrain Pro surrounded by other pedals.

    You can use this to control pretty much anything that is MIDI aware. Including triggering hardware or software synths via MIDI NOTE for those of you wanting to do Taurus type pedal triggering.

    $120 shipped Conus OBO
     
  2. cubanbass

    cubanbass Gold Supporting Member

    Feb 1, 2006
    Hoboken, NJ
    Bump
     
  3. cubanbass

    cubanbass Gold Supporting Member

    Feb 1, 2006
    Hoboken, NJ
    Bump
     

Share This Page