1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

Behringer V Amp Pro preamp bypass mode

Discussion in 'Effects [BG]' started by jaybyname, Feb 12, 2013.


  1. "To bypass the pre-amp section and remove all tonal coloring imparted by it, press the [TUNER] + [TAP] buttons simultaneously. This state could be considered the 33rd available AMP model and the one most truthful to the signal you are feeding the V-AMP. Pressing the same keys again will bring back the pre-amp section".

    Hi, hope all is well.

    I know this may have been mentioned before but im having trouble turning it off on my V amp pro. Im set to L3 and using the effects as normal. Then pressed the TUNER and TAP simultaneously and let go. The effect was still on. I had to turn the effect knob down. Am I doing this right? Looking for that piece of mind that cab sim AND effects can be turned off.

    Hope you can help.

    Jason
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.