*update*The HS112 is SOLD. Going to keep the HS210 for now These were purchased new in 2006 from Rock City Guitars in Sommerville, MA. Hand delivered by Jim Bergantino! They are some of the first production 210S and 112S cabs ever made. They have seen a few tours, and lots of gigs, but have been well cared for. The cabs are in perfect working order, and sound fantastic. Incredibly smooth and full, with one of the best horns in the business, adds the perfect amount of air without sounding harsh. They are really nice plug and play cabinets, not a lot of work needed to make them sound good. They do have a few cosmetic blemishes, a single nick in the 210's carpet, some light scuffing on the grill of the 210, and some wear on the corner protectors. [DEL]The 112 has seen less use and is in a bit better condition. [/DEL] [DEL]I would prefer to sell the cabs as a set, but I will break them up once I have a buyer for the 112.[/DEL] The cabs are currently in Portland, ME but I work in Northern MA and I would be willing to drive 100 miles or so to meet up (ME,NH,MA,VT,RI) are all possibilities. Otherwise buyer pays shipping. Model HT210S specifications: • 2-10" cast frame woofers w/ 56oz. magnets, vented pole pieces and 2.5" voice coils • high intelligibility tweeter with cast horn • power handling - 500 watts rms • custom phase - coherent crossover with tweeter level control • frequency response: 45hz-18khz • sensitivity: 100db • anechoic: 2.83v/1m • impedance: 4 or 8 ohms • dimensions: 18"H x 22 3/4" W x 11 1/2" D • weight: 55lbs. Model EX112S specifications: • 1-12" cast frame woofer w/ 80oz. magnet, vented pole piece and 3" voice coil • power handling - 400 watts rms • frequency response: 36hz-2.5khz • sensitivity: 96db • anechoic: 2.83v/1m • impedance: 8 ohms • dimensions: 18"H x 22 3/4" W x 11 1/2" D • weight: 48lbs.