1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Bridge for a 1970's Univox Badazz Bass

Discussion in 'Hardware, Setup & Repair [BG]' started by MarkIIIGrinder, Feb 7, 2014.


  1. MarkIIIGrinder

    MarkIIIGrinder

    Feb 7, 2014
    About two months ago, a beat 1970's Univox Badazz bass came into our store stripped of literally everything except for the frets, neck joint plate and the binding. I ended up taking it off the customers hands for $20 with the hopes of refinishing it. I've got everything I need at this point except for the bridge. The problem I'm facing is that the now standard string spacing seems to be around 2 1/4 inches, but the neck on this bass is much smaller than the standard bass, about the same size as an Epiphone Viola bass, meaning I need a bridge between 1 7/8 and 2 1/8 inch spacing to get it match up with the neck. Allparts call and a google search later, I haven't been able to find anything close.

    Can anybody help point me in the right direction?

    Thanks!