1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Bridge pup goes dead

Discussion in 'Pickups & Electronics [BG]' started by pepsbro, Aug 30, 2007.


  1. pepsbro

    pepsbro

    Jun 16, 2007
    Rhode Island
    I have a fender jazz with S1 switching. I replaced the original pickups with Dimarzio 123's. When I depress the switch the bridge pup goes dead. I have checked the diagram and the wiring seems right. I soldered the black and white wire's together and ran the red and green wires to contact. I'm Baffled.
    pete
     
  2. luknfur

    luknfur

    Jan 14, 2004
    DIXIE
    If you're going to assume anything (not recommended), always assume your work is wrong and not any component.

    Switches are among the more challening wiring projects and I'd bet you've got it wrong.

    Wire the pickup straight to the jack and you'll know if the pup has an issue ("assuming" it's wired properly and the rest of the chain is operating properly).
     

Share This Page